UBSCHIDNTFT-2025-6-O - L-Università ta' Malta

Course Title

Bachelor of Science (Honours) in Dental Technology

MQF Level

Duration and Credits

3 Years

180 ECTS

Mode of Study

Full-time

Information for International applicants

Refer to the list of country-specific qualifications

An Advanced Level pass in Biology or Chemistry or an Intermediate Level pass at Grade C or better in Biology or Chemistry.

Applicants in possession of a pass with Merit or better in the Diploma in Dental Surgery Assistance shall be considered as having satisfied both the general and special entry requirements.

The maximum number of applicants that can be admitted into the course is 6 students.

The Admissions Board, acting on the advice of the Board, may admit applicants in possession of a Diploma in Health Science in the area of Dental Technology awarded by the University of Malta into the second year of the Course in the same area of study, in terms of regulation 8.1 of the Admission Regulations of the University.

Prior to enrolling for the Course, accepted applicants are also required to undergo an occupational health assessment as detailed in the Occupational Health Protocol approved by the Faculty Board, so as to ascertain that they are fit for the duties related to their proposed studies. Students who do not fulfil this requirement shall be barred from attending the clinical placements indicated in the programme of studies.

You are viewing the entry requirements for International applicants. Switch to Local qualifications.

Need help? Request more information

Apply

You can submit your application online. The deadlines for submission of applications vary according to the intake and courses. We encourage all international applicants to submit their applications as soon as possible. This is especially important if you require a visa to travel and eventually stay in Malta.

You can compare your national qualifications to the local requirements by visiting our qualifications comparability webpage. Access more information about our admission process and English language requirements.

The University of Malta has student accommodation on campus called Campus Hub. Campus Hub is just a 2-minute walk from the main campus. For more information, visit the accommodation website.

Our dedicated team at the student recruitment office is here to support you every step of the way. From the moment you start your application to the moment when you receive your decision letter, we're here to assist you. If you have any questions or need further information, don't hesitate to reach out to us. You can contact us at info@um.edu.mt, and our team will be more than happy to help.

After you receive an offer from us, our International Office will assist you with visas, accommodation and other related issues.

This three-year undergraduate course, inclusive of the summer period, provides you with an introductory knowledge to the theory and scientific foundation of dental technology. It will prepare you with the necessary skills in laboratory practice within the professional environment of the teaching laboratory in a structured manner, ranging from basic dental technology skills and patient observation in clinical settings, to studies in removable prostheses and the theory and technical practice of fixed prosthodontics, to name a few. The course will provide sufficient knowledge to enable you as future dental technologists to undertake work prescriptions from the dental clinic and carry out the necessary work with responsibility.

The course will span three academic years inclusive of two semesters per year and a summer period. This will allow you to be exposed to the theory and scientific foundation of the profession and also become skilled in laboratory practice within the professional environment of the teaching laboratory in a structured manner as follows:

Course Overview

1st Year

You will receive knowledge on basic dental technology skills with reference to the construction of partial and complete upper and lower acrylic dentures. This will include the theoretical aspects of occlusion and material science. The health and safety aspects regarding laboratory procedures are also included as an important part of the studies. In parallel, you will also learn to perform dental laboratory technology skills and observe patients whilst working in a dental clinical setting.

2nd Year

You will further your studies in partial dentures including the construction of cast partial frameworks. The subject of orthodontics is tackled starting from the construction of basic appliances going on to the construction of functional appliances. Management skills are taught in preparation for the future running of a dental laboratory.

3rd Year

In the final year of the course, you will be exposed to the theory and technical practice of fixed prosthodontics. You will be able to observe the insertion of your own laboratory work in the teaching clinic. During your laboratory skills training, you will be exposed to various cases, in the subject being managed at the moment.

You will also be guided towards carrying out a research project to be presented by the end of the course.

The course will provide sufficient knowledge to enable you in becoming a professional dental technologist, and will therefore assume the repsonsibility to undertake work prescriptions from the dental clinic and carry out the necessary work with responsibility.

Communication and Academic Skills Programme

The communication and academic skills programme complements students’ main course of study. It introduces them to writing and presenting as situated within academic contexts sensitive to specific disciplines and develops their competences for future careers.


Year (This/these unit/s start/s in Semester 1 and continue/s in Semester 2)

Compulsory Units (All students must register for this/these unit/s)

DNS1003	Evidence Based Dentistry 1	4 ECTS	(NC)
DNS1007	Anatomy and Physiology of the Oral Cavity	6 ECTS	(NC)
DSG1500	Dental Laboratory Practice - Complete Dentures	8 ECTS	(NC)
DSG1503	Dental Materials Sciences	4 ECTS	(NC)
ORC1105	Preventive Dentistry and Dental Public Health 1	4 ECTS	(NC)
ORC1800	Removable Prosthodontics - Complete Dentures	5 ECTS	(NC)
PAT1500	Microbiology and Immunology	4 ECTS	(NC)


Semester 1
DNS1203	Head and Neck Anatomy for Allied Dental Health Professionals	6 ECTS	(NC)
DNS1405	Health and Safety in the Dental Laboratory	4 ECTS	(NC)


Semester 2

Compulsory Units (All students must register for this/these unit/s)

ORC1003	Clinical Ethics	4 ECTS	(NC)
ORC1802	Removable Prosthodontics - Acrylic Partial Dentures	5 ECTS	(NC)


Summer Period

Compulsory Units (All students must register for this/these unit/s)

DSG1501	Summer Laboratory Practice 1	6 ECTS	(NC)

Requirement for regular progression to Year 2: 60 ECTS credits.


Year (This/these unit/s start/s in Semester 1 and continue/s in Semester 2)

Compulsory Units (All students must register for this/these unit/s)

DNS2030	Clinical Medical Sciences for Dental Technology Students	4 ECTS	(NC)
ORC2105	Preventive Dentistry and Dental Public Health 2	4 ECTS	(NC)


Semester 1

Compulsory Units (All students must register for this/these unit/s)

DNS2115	Evidence Based Dentistry 2	4 ECTS	(NC)
DSG2500	Dental Laboratory Practice - Cast Removable Prostheses	10 ECTS	(NC)
EMA1011	Introduction to Management and Applied Fundamentals	4 ECTS	(NC)
ORC2800	Removable Prosthodontics - Cast Removable Prostheses	6 ECTS	(NC)


Semester 2

Compulsory Units (All students must register for this/these unit/s)

DNS2031	Orthodontics 1	6 ECTS	(NC)
DNS2032	Orthodontics 2	6 ECTS	(NC)
DSG2501	Dental Laboratory Practice - Orthodontics	10 ECTS	(NC)


Summer Period

Compulsory Units (All students must register for this/these unit/s)

DSG2502	Summer Laboratory Practice 2	6 ECTS	(NC)

Requirement for regular progression to Year 3: 60 ECTS credits.


Year (This/these unit/s start/s in Semester 1 and continue/s in Semester 2)

Compulsory Units (All students must register for this/these unit/s)

DSG3000	Research Project	12 ECTS	(NC)


Semester 1

Compulsory Units (All students must register for this/these unit/s)

DNS3112	Biostatistics and Health Informatics	6 ECTS	(NC)
DNS3114	Clinical Governance and Audit	4 ECTS	(NC)
DSG3503	Dental Laboratory Practice - The Single Tooth Prosthesis	10 ECTS	(NC)
ORC3800	Fixed Prosthodontics - The Single Tooth Prosthesis	5 ECTS	(NC)


Semester 2

Compulsory Units (All students must register for this/these unit/s)

DSG3504	Dental Laboratory Practice - Replacement of Missing Teeth	10 ECTS	(NC)
ORC3802	Fixed Prosthodontics - Replacement of Missing Teeth	5 ECTS	(NC)


Summer Period

Compulsory Units (All students must register for this/these unit/s)

DSG3502	Summer Laboratory Practice 3	8 ECTS	(NC)

Requirement for successful completion of Year 3: 60 ECTS credits

Requirement for successful completion of Bachelor of Science (Honours) in Dental Technology: 180 ECTS credits.

This programme of study is governed by the General Regulations for University Undergraduate Awards, 2019 and by the Bye-Laws for the award of the Degree of Bachelor of Science (Honours) - B.Sc. (Hons) - under the auspices of the Faculty of Dental Surgery.

By the end of the programme, you will be able to:

Construct fixed or removable prostheses and removable orthodontic appliances.
Manage the running of a dental laboratory and in a dental team.
Maintain health and safety in the laboratory environment.
Relate and interact effectively with individuals and groups as part of the dental team
Use a range of technological equipment and systems
Apply a range of skills and techniques to develop a variety of ideas in the creation of new/modified dental products and services.

By the end of the programme, you will be able to:

Construct fixed and removable prostheses.
Construct removable orthodontic appliances.
Manage the running of a dental laboratory.
Maintain health and safety in the laboratory environment.
Work in a dental team.
Relate and interact effectively with individuals and groups as part of the dental team.
Use a range of technological equipment and systems.
Apply a range of skills and techniques to develop a variety of ideas in the creation of new/modified dental products and services.

Non EU Applicants:

Fee per academic year: Eur 10,800

You are viewing the fees for non EU nationals. Switch to EU nationals if you are a national of any country from within the EU/EEA.

As a graduate in the Bachelor of Science (Honours) in Dental Technology, you will be employable in both the private sector and in the government health services.

Every effort has been made to provide information that is current and accurate. However, as the content is being constantly updated, users are advised to verify the details contained in these web pages with the relevant University office or authority before making decisions based on the published information.